Teradek Bolt 300 SDI Transmitter/Receiver Set

  • $2490.00
Qty:  
You will earn up to 2490 reward points after purchasing this product.
Previous image
Bolt SDI Tx/RX
Next image
Zoom image
  • Weight
    6 lbs
  • SKU
    10-0920

Teradek Bolt is a premium wireless point to point video solution for cinematographers, broadcasters, and independent content creators. Transmit uncompressed 1080p video wirelessly over 300-3000 feet with the Teradek Bolt 3G-SDI or HDMI Wireless Transmitter-Receiver Set. Sets include one transmitter and one receiver equipped with your choice of 3G-SDI or HDMI ports. The units are compact and feature internal antennas so they can fit on your camera rig and in your video village, DIT cart, or director's monitor rig. When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.

Bolt comes in 5 type of models named after their distance coverage: Bolt 300, Bolt 600, Bolt 1000, Bolt 2000, Bolt 3000. Purchase a pre-configured transmitter/receiver set or built your own! Transmitter and receiver models must be from the same group (300, 600 etc.), but you can mix and match the 3G-SDI/HDMI ports. Select the proper model from the drop down menu option.

What's in the box?
- Bolt 300 SDI Tx/Rx
- SKB Case
- 1 Year Warranty


See the product video overview:

 


    Video

  • Resolution
    1080p 60 fps
  • Input/Output
    3G-SDI
  • Multicast
    Up to 4 Rx

  • Connectivity

  • Range
    300 feet
  • Rapid Reconnect
    No
  • Number of 20 MHz DFS channels
    None
  • Number of 40 MHz DFS channels
    9
  • TX HDMI / SDI Converter
    None
  • Latency
    < 0.001 seconds

  • Other

  • Gen 1 Sidekick Compatible
    Yes
  • Metadata Support
    Yes
  • USB 3.0 Grab Engine
    Yes
  • Specifications
    Size (Tx): 27 x 66.1 x 112.3mm

    Weight: 262g / 346g
  • Available models
    Bolt 300 3G-SDI Video Transceiver Set (10-0920), Bolt 300 TX/2RX 3G-SDI Video Transceiver Set [10-0923], Bolt 300 3G-SDI Video Rx Only [10-0922], Bolt 300 3G-SDI Video Tx Only [10-0921]

Refer to the specification page for detail feature availability per model.

 

Built Like a Tank
Bolt is housed in a hardened aluminum chassis designed to withstand years of abuse in both extremely hot and cold conditions. Both the TX and RX feature 1⁄4”-20 holes for mounting to cameras and monitors as well as 2-pin Lemo connectors for power. Unique to Bolt 1000 and 3000, a built-in OLED on the RX allows you to quickly configure the system as well as apply 3D LUTs at the touch of a button.

Wireless Video Refined
Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. We’ve also improved reconnect times so your wireless link is restored instantly when you come back into range.

Reliable Transmission in Any Environment
Operate more than twice as many wireless systems at one location or evade heavy interference. With Bolt 3000, you can transmit over 20MHz channels for a more robust signal in challenging RF conditions.

*20MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions. However, audio transmission, as well as interlaced, PSF, and 1080p60/50 frame rates are not currently supported.

Smaller, Lighter, and Even More Rugged
The Bolt 1000 and 3000 transmitters are 20% smaller than previous systems and lighter too. We’ve also improved their resilience in high heat conditions so that they operate flawlessly all the way up to 130F.

More Channels to Transmit Over
Bolt also offers manual frequency control so your crew can carefully manage your wireless workflow wherever you’re shooting. The Bolt 3000 can operate on 2 new DFS channels, allowing interference-free video transmission in more environments than ever before.

Transmit to Multiple Receivers
All Bolt models are multicast capable up to 4 receivers of the same range at the same time. This means you can send your video feed to monitors, switchers, recorders, and even Teradek Cubes simultaneously with no loss in quality or added delay.

Built-in Cross Conversion *
Every Bolt model supports real-time standards and cross conversion from TX to RX, allowing you to automatically convert resolution, frame rate, and inputs/outputs (HDMI / 3G-SDI) without any additional hardware.

Metadata & Time Code Support
All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.

3D LUT Integration
Apply the look you’re after directly to your wireless video feed using Bolt’s integrated 3D LUT technology. Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt’s OSD.

Cut Through the Interference
The Panel Array Antenna is your go-to solution for cutting through wireless interference in crowded environments. When attached to a Bolt 1000 or 3000, the antenna provides and extremely robust directional signal that will ensure your signal arrives uninterrupted.

Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX features a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

Forget About Capture Cards
Bolt’s USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality.